Newbie chain clip question

[PocketSidewalk]

If the stakes were accidentally moved, wouldn't you have to know the yard line where the chain was clipped if you needed to return the stakes to their previous positions?


I guess I should clarify my reason for asking: Some fellow officials suggested making your own clip instead of purchasing a clip with a yard line indicator on it (like the disc or slider types). There reasoning was that the linesman doesn't have time to be twisting the dial every time the chains move. But if the clip doesn't have a mechanism for recording which yard line it was on, then someone has to keep up with that.

[Welpe]

The linesman isn't responsible for working with the clip. That is the responsibility of the chain crew.

[PocketSidewalk]

So do most of you guys use the disc or slider style clip and have the clip man change it each time the chain is clipped for a new series?

Anyone using a homemade variation?

[Lintner5]

I use a homemade version of the chain clip (i.e., a double-sided pet lead clip with a washer through the other end for weight). The chain crew guy in charge of the clip and I use our extensive memories to remember what yard line was clipped.

... Now, where'd I put my rule book? ...

[Mike L]

Whoever sets the clip should be keeping up with that. Of course it's still the HL's responsibility to know where it is anyway in the event you allow the chains to move before they are supposed to move.

As for which type I use, I like the slider. Once had someone step on the plastic disc and broke it. Hard to break fabric.

[FBullock]

I work HL & have the chain crew use a 2 clip system. Keep the orginal clip on until the next play after you've moved the chains. When using 2 clips, I have one of each. That way I can take a quick look back & see if they are doing it & if the chains get moved, we'll know which one to go back to.

At sub-varsity level, I only use one & hope we have crew that will use it & stay with us.

[With_Two_Flakes]

I'm on the same page as Mike L. Nowadays I prefer the fabric clip with the slider as I too have had a plastic disk type trodden on and broken. I like to carry a spare lightweight home-made clip just in case. I bought the cheapest doglead I could find and simply cut off the clip part, discarded the rest of the lead.

A related tip I would give you about working the HL position is about zip ties.



I have my local area guys carry a zip tie for emergency chain repair. I keep one inside the band of every one of my hats. I might forget to put a zip tie in my pocket, but I'm unlikely to forget my hat!

Maybe once a season you'll have a chain set break on you. Panic ensues....
You walk up and fix it in seconds with a zip tie.

In addition, I use a coloured zip tie (I find that yellow is the most visible) for the halfway mark on the chain as atletic tape can get dirty and be less visible. That way the HL can let your White Hat know before the snap whether we are short - i.e. 5yd penalty marched against the D gives us a new 1st down or long (5 ain't enough).

[MD Longhorn]

Originally Posted by PocketSidewalk

If the stakes were accidentally moved, wouldn't you have to know the yard line where the chain was clipped if you needed to return the stakes to their previous positions?


I guess I should clarify my reason for asking: Some fellow officials suggested making your own clip instead of purchasing a clip with a yard line indicator on it (like the disc or slider types). There reasoning was that the linesman doesn't have time to be twisting the dial every time the chains move. But if the clip doesn't have a mechanism for recording which yard line it was on, then someone has to keep up with that.

Ah - I see now. I use a real clip (slider), so didn't get your intent. In fact, if you use the proper equipment, the issue you're asking about isn't an issue.