![]() |
|
|
|||
i don't expect any head chewing from a pretty straightforward post. it appears to me like your self evaluation of being consistent is probably right on, as this guy who told his team you are going to call strikes knows where your zone is from past games. as far as being a compliment...you could take it either way. you're consistent, but he likely thinks you're too big.
now, what to do about it... i'm sure you've read on here and know from experience that the outside edge of the zone is relative to the umpire, cuz most of us are not set up on that edge, so the outer definition is where the individual perceives it to be. when i feel like i am struggling with that edge (usually due to gripes or from the catcher if i have a good working relationship with him) is to move around a bit before the pitch comes when the catcher moves outside. (i said before the pitch comes because i do not vary my position from the inside edge of the plate.) what am i doing when i move is quickly taking a glance from over the top of him to see where the center of his mitt is sitting in relation to the plate. is it right on it? is off a ball? more? then i get back over to the inside edge and see the pitch. if it sticks where the catcher is set up, i file the look from that spot in my memory bank and use the information i just gathered from taking a peek to help me redefine the outside edge. granted, i'm lucky enough to work ball where the guys hit their spots for the most part, but maybe this would work for you. another thought is to work with the catcher. if it's a kid you've seen a time or two, ask him. and be honest about it. "shooter, i think i'm getting a tough look at the outside edge. where'd you have that 1-1 pitch to the last kid?" or even be more straight to the point, "shooter, i feel like i'm gettin a good look at the outside edge and consistently calling the same pitches strikes, but, am i giving too much?" if you think he's giving you an answer from a catcher's POV cuz he wants to keep getting that pitch, ask him if he'd be upset if you called that pitch a strike on him. to reiterate the opening thought, this should probably only be done with a catcher you are familiar with. that's long enough.
__________________
"To dee chowers!!" |
|
|||
The way I see it is that if you're consistantly calling one ball wide all the time, then you don't have a problem. Like Bobbybanaduck mentions, it might be good to check your 'points of reference', the catcher's location relative to the outside corner. I would also ask your partner's opinion about your zone. I always ask my partners after games about my zone and how they felt it was.
__________________
Bob P. ----------------------- We are stewards of baseball. Our customers aren't schools or coaches or conferences. Our customer is the game itself. |
|
|||
if the level you are working dictates calling one ball wide, then, by all means, call one ball wide. the problem that seems to be arising in the OP is the perception of what really is one ball wide. if what you think is one ball wide is really more like two, then you've been consistently calling a zone bigger than what you thought.
__________________
"To dee chowers!!" |
|
|||
Be consistent, I always gave the same amount on each side of the plate and there was no better compliment to me, then to here he has been calling that same pitch all game and you guys still can't figure it out.
Call strikes , call strikes and be consistent. That is what most players and coaches like. More strikes usually results in the bat being swung more. Which usually results in the players deciding the game on their own. Call strikes and be consistent. |
|
|||
Calling balls and strikes (since your working a high quality of ball I'm assuming your setting up properly etc.) comes down to three important factors: Timing, timing and timing. Master this and you will rarely if ever have a "gross miss". If the guys in the show miss pitches we can too. I don't think I've ever had a game that I didn't have a borderline pitch or two or three that I wouldn't mind having another look at. Inevitably the pitches that I find myself questioning are a result of bad timing.
If you do feel you missed a borderline pitch hopefully you called it a strike ![]() |
|
|||
I have been told by some that I call the low strike, consistently. Everyone who knows me knows it, and they adjust.
I have noticed that the higher the level of ball, the tighter the zone. Summer league D3 play should not be so tight. |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Outside Corner | canadaump6 | Baseball | 21 | Sun Aug 26, 2007 12:27am |
I know this is risky, but... | rainmaker | Basketball | 10 | Thu May 31, 2007 08:55am |
Mick's corner of the world | stan-MI | Basketball | 11 | Fri Mar 12, 2004 03:46pm |
Blind Corner | rainmaker | Basketball | 23 | Fri Jan 03, 2003 04:51pm |
3 men in a corner | crabber | Soccer | 5 | Tue Dec 19, 2000 08:28am |