Clock reads 0:00

[Smitty]

Originally Posted by slow whistle

Well if you read 5-2-5 it says the 3/10ths rule does not apply if the scoreboard does not display 10ths of a second so your point above moot....that said it is an interesting point and if I knew that there were 2/10ths I would probably not allow a catch and shoot (and would hope that the operator is on point and starts the clock on time so I get a horn!), but according to the rule I should not even consider it....which is a good reason to not even look at the module if it is not on the board, don't tempt yourself with knowledge you shouldn't have!

I'm pretty sure that the intent of the stated rule was for scoreboards which have control modules that also don't display 10th of a second. Using common sense, if the control module DOES show 10ths of seconds, why wouldn't you use that information? You certainly can use that information to determine whether a catch and shoot is possible. If you don't use that information, then you are not using good common sense.