Chopping clock on FT?

[WhistlesAndStripes]

Originally Posted by UNIgiantslayers

We were talking as a crew the other night about chopping on a FT. We've been working together for a couple years, but I subbed in for another crew last week who does the FT chop differently than we always do. I've never given it much thought, and was looking up in NFHS mechanics who is supposed to chop. Is anyone able to point me to where this is specified?

In the 2015-2017 NFHS Officials Manual it is found in the following locations:

For 2 man mechanics, look at Pages 39-40 under 4.2.3.B.8 and 4.2.3.C.9.

For 3 man mechanics, look at Pages 74-75 under 5.2.3.B.7 and 5.2.3.C.8.

[Dad]

Originally Posted by Whistles & Stripes

In the 2015-2017 NFHS Officials Manual it is found in the following locations:

For 2 man mechanics, look at Pages 39-40 under 4.2.3.B.8 and 4.2.3.C.9.

For 3 man mechanics, look at Pages 74-75 under 5.2.3.B.7 and 5.2.3.C.8.

Does it say C?

[WhistlesAndStripes]

Originally Posted by Whistles & Stripes

In the 2015-2017 NFHS Officials Manual it is found in the following locations:

For 2 man mechanics, look at Pages 39-40 under 4.2.3.B.8 and 4.2.3.C.9.

For 3 man mechanics, look at Pages 74-75 under 5.2.3.B.7 and 5.2.3.C.8.

Originally Posted by Dad

Does it say C?

Sometimes.

I recommend you go and read it.

[bob jenkins]

Originally Posted by Whistles & Stripes

Sometimes.

I recommend you go and read it.

For those of us who do not have / get / use the manual, what does it say?

Here, it's C in 3-person.

[WhistlesAndStripes]

Originally Posted by bob jenkins

For those of us who do not have / get / use the manual, what does it say?

Here, it's C in 3-person.

The OP didn't differentiate between a made and missed FT or between 2-man and 3-man mechanics.

The first citation in each classification(2-Man or 3-Man) above basically says that C in 2 man, or T in 2 man, chops time after a missed FT.

The second citation in each classification says that L chops after a made FT.

[UNIgiantslayers]

Originally Posted by Whistles & Stripes

The OP didn't differentiate between a made and missed FT or between 2-man and 3-man mechanics.

The first citation in each classification(2-Man or 3-Man) above basically says that C in 2 man, or T in 2 man, chops time after a missed FT.

The second citation in each classification says that L chops after a made FT.

The old L/new T is how I'm picturing it. Is that what you mean?

[WhistlesAndStripes]

Originally Posted by UNIgiantslayers

The old L/new T is how I'm picturing it. Is that what you mean?

Yes.

[Raymond]

Originally Posted by Whistles & Stripes

...

The second citation in each classification says that L chops after a made FT.

I would hope that was already assumed, but apparently things are weird in Iowa.

[WhistlesAndStripes]

Originally Posted by BadNewsRef

I would hope that was already assumed, but apparently things are weird in Iowa.

Yeah, are they still having a coin flip to determine who gets the ball first in Girls games?

[referee99]

C. Trail Official
1. Take a position just above the free-throw line extended and halfway between the nearer free-throw lane-line extended and the sideline.
2. Be primarily responsible for holding or beckoning substitutes and any other table activity.
3. Observe players in the backcourt.
4. When the thrower receives the ball, begin a visible 10 count with wrist flicks.
5. Observe the thrower and top two spaces on the opposite lane line for violations; give the appropriate signal immediately if either team violates. See Diagram 2-12
6. Observe the flight of the ball and note whether the ball goes through, contacts or misses the ring.
7. Close down when the ball contacts the backboard or ring and officiate rebounding action in PCA.
8. Watch for goaltending or basket interference.
9. Signal to start the clock if the final throw or the first throw of a one-and-one is unsuccessful and the ball is to remain live.