New Mechanic?

[josephrt1]

In California ASA mechanics clinic about 3 or 4 years ago, for base ump starting along 1st base line and ball hit to OF, the instructors were teaching to come inside (traditional inside/outside mechanic) and position 10 ft inside the 2nd baseline and 10 ft off the 1st baseline. That is the 1st inside position. What you do next depends on the play. If the runner rounds 1st and continues to 2nd, you would run parallel to the runner taking them into 2nd base or beyond.
If the player rounded 1st and then had to scurry back on a back-pick, the umpire would move toward the 1st base line to get their calling position, just short of 1st base and 10-12 ft from the base/tag. I don't recall an instructor ever saying to automatically get to the 1st base line. It seems you do need to get inside (the 10/10 position seems pretty good) and then adjust based on where the runner/play takes you.
And of-course, when getting inside you have to be very aware of where the ball is, where the fielders are and avoid getting in the way.

[IRISHMAFIA]

Originally Posted by josephrt1

In California ASA mechanics clinic about 3 or 4 years ago, for base ump starting along 1st base line and ball hit to OF, the instructors were teaching to come inside (traditional inside/outside mechanic) and position 10 ft inside the 2nd baseline and 10 ft off the 1st baseline. That is the 1st inside position. What you do next depends on the play. If the runner rounds 1st and continues to 2nd, you would run parallel to the runner taking them into 2nd base or beyond.
If the player rounded 1st and then had to scurry back on a back-pick, the umpire would move toward the 1st base line to get their calling position, just short of 1st base and 10-12 ft from the base/tag. I don't recall an instructor ever saying to automatically get to the 1st base line. It seems you do need to get inside (the 10/10 position seems pretty good) and then adjust based on where the runner/play takes you.
And of-course, when getting inside you have to be very aware of where the ball is, where the fielders are and avoid getting in the way.

I understand the need to cover a throw to 1B, but not all the way back to the line or to a specific location, but to where it is necessary to get a good looke at the play.

This may be nothing more than people misunderstanding a direction, much like those who think U1 should always be 45 degrees to the base on an attempt to retire a batter runner.

Thanks

[Andy]

Originally Posted by josephrt1

In California ASA mechanics clinic about 3 or 4 years ago, for base ump starting along 1st base line and ball hit to OF, the instructors were teaching to come inside (traditional inside/outside mechanic) and position 10 ft inside the 2nd baseline and 10 ft off the 1st baseline. That is the 1st inside position. What you do next depends on the play. If the runner rounds 1st and continues to 2nd, you would run parallel to the runner taking them into 2nd base or beyond.
If the player rounded 1st and then had to scurry back on a back-pick, the umpire would move toward the 1st base line to get their calling position, just short of 1st base and 10-12 ft from the base/tag. I don't recall an instructor ever saying to automatically get to the 1st base line. It seems you do need to get inside (the 10/10 position seems pretty good) and then adjust based on where the runner/play takes you.
And of-course, when getting inside you have to be very aware of where the ball is, where the fielders are and avoid getting in the way.

This same discussion came up at the Tournament I was working this past week. A very well respected member of the ASA National Staff basically said this same thing. Make your button hook, don't automatically parallel the runner back to first base, but be ready to move where the play takes you.

[IRISHMAFIA]

Originally Posted by Andy

This same discussion came up at the Tournament I was working this past week. A very well respected member of the ASA National Staff basically said this same thing. Make your button hook, don't automatically parallel the runner back to first base, but be ready to move where the play takes you.

Sometimes you have to wonder if it is the way it is being taught or the umpire just not listening to or misunderstanding the entire instruction.