The Official Forum

The Official Forum (https://forum.officiating.com/)
-   Softball (https://forum.officiating.com/softball/)
-   -   DP / Flex Help! (https://forum.officiating.com/softball/57621-dp-flex-help.html)

NPRIVITOR Fri Mar 19, 2010 11:34pm

DP / Flex Help!
 
Hi Blues, a friendly coach here and I've been told this is the best source for my rule questions regarding NFHS.

I "think" that I have a fair understanding of the DP / Flex rule. However, like most coaches, there are some things I need some guidance with.

From my understanding, the DP can enter on Defense for any person at any time. If the DP enters on defense for the Flex, then the Flex has left the game. I have 2 questions regarding this scenario.

1. Can the Flex (or substitue) re enter as the Flex and i'm back to 10 players again? I can go from 9 to 10 players a number times during the game by using subs in the Flex position - is this correct?

2. A bit more complicated question (for me anyway). Of the players, I have Player1 as my DP batting in the 1 hole, Player2 as my Flex, Player3 batting in the 4 hole playing F8. Since the DP can enter the game for anyone at anytime, can I enter the DP during the top of the 1st inning and place Player3 on the bench. Now I would have my DP and Flex on defense. Is the DP designation still assigned to Player1 or did it follow Player3 to the bench.

Thanks!

RKBUmp Fri Mar 19, 2010 11:51pm

If you are going to use the DP/Flex, the DP must be one of the 9 batters, and the flex is listed 10th.

As long as you start the game with the DP/Flex, you can switch back and forth between 10 and 9 players any number of times as long as you have available substitutes.

rwest Sat Mar 20, 2010 12:04am

The DP Designator
 
Quote:

Originally Posted by NPRIVITOR (Post 669399)
Hi Blues, a friendly coach here and I've been told this is the best source for my rule questions regarding NFHS.

I "think" that I have a fair understanding of the DP / Flex rule. However, like most coaches, there are some things I need some guidance with.

From my understanding, the DP can enter on Defense for any person at any time. If the DP enters on defense for the Flex, then the Flex has left the game. I have 2 questions regarding this scenario.

1. Can the Flex (or substitue) re enter as the Flex and i'm back to 10 players again? I can go from 9 to 10 players a number times during the game by using subs in the Flex position - is this correct?

2. A bit more complicated question (for me anyway). Of the players, I have Player1 as my DP batting in the 1 hole, Player2 as my Flex, Player3 batting in the 4 hole playing F8. Since the DP can enter the game for anyone at anytime, can I enter the DP during the top of the 1st inning and place Player3 on the bench. Now I would have my DP and Flex on defense. Is the DP designation still assigned to Player1 or did it follow Player3 to the bench.

Thanks!

The DP designator stays with the player batting in the DP spot. If you have a sub who comes in to bat for the DP, don't you still have a DP? If the DP plays defense for any of the 9 players, isn't the DP still batting? The answer to both questions is Yes.

shagpal Sat Mar 20, 2010 12:28am

hi coach, the easiest way to understand the DP/FLEX, SUB, CR rules all in one visual is to see it from the lineup card point of view. use this link to see an excellent presentation that might help clarify how you can move your players around.

this presentation is of managing the lineup card from an umpires point of view, but it will most certainly help you as a coach as well.

Lineup Card Management

NPRIVITOR Sat Mar 20, 2010 06:43am

Does DP follow player or position?
 
So in scenario 2, when my DP comes in on Defense and puts the person playing F8 on the bench, the DP is the person on Defense, not the person on the bench.?? Yesterday, an official told us that the DP followed the person to the bench. This didn't make sense to us because the Flex would then be able to bat for anyone who was put on the bench.

thanks

Dakota Sat Mar 20, 2010 09:29am

The answer to your original #1 is "yes." Just be aware that the player who started as FLEX has left the game, and therefore has one re-entry remaining, so if you do this again, that player will be done for the game. You can put in a sub for the FLEX position, however, and go back to 10.

Quote:

Originally Posted by NPRIVITOR (Post 669424)
So in scenario 2, when my DP comes in on Defense and puts the person playing F8 on the bench, the DP is the person on Defense, not the person on the bench.?? Yesterday, an official told us that the DP followed the person to the bench. This didn't make sense to us because the Flex would then be able to bat for anyone who was put on the bench.

thanks

I don't understand this "followed to the bench" at all.

Simply put, when DP plays on defense for any player other than FLEX, NO ONE has left the game. The batting order is unchanged. In your example, F8 sits out on defense that inning, but remains in the game and bats in her regular slot in the batting order. DP remains in the batting order in her regular slot, too.

With the DP, you have a 10th defensive player you can use in defensive position changes just like any other defensive player with no effect on the batting order and with no one leaving the game, with the exception of if DP plays defense for FLEX, FLEX has left the game.

SethPDX Sat Mar 20, 2010 05:57pm

Quote:

Originally Posted by NPRIVITOR (Post 669399)
1. Can the Flex (or substitue) re enter as the Flex and i'm back to 10 players again?

Yes. It counts as the Flex's one re-entry for the game.
Quote:

Originally Posted by NPRIVITOR (Post 669399)
I can go from 9 to 10 players a number times during the game by using subs in the Flex position - is this correct?

Yes, keeping in mind each time you go back to 10 from 9, the person coming in needs to be eligible to come back in the game (as in, a sub who has never been in the game or who has not used her re-entry).

Quote:

Originally Posted by NPRIVITOR (Post 669399)
2. A bit more complicated question (for me anyway). Of the players, I have Player1 as my DP batting in the 1 hole, Player2 as my Flex, Player3 batting in the 4 hole playing F8. Since the DP can enter the game for anyone at anytime, can I enter the DP during the top of the 1st inning and place Player3 on the bench.

Yes. Your DP is now on defense but Players 1 and 3 will both still be hitting. Player 3 is still considered to be in the game.
Quote:

Originally Posted by NPRIVITOR (Post 669399)
Is the DP designation still assigned to Player1 or did it follow Player3 to the bench.

Player 1 was named the DP at the start of the game so she will remain the DP. The DP is locked into the #1 spot in the batting order in your scenario. Player 3 doesn't really get a designation. She is still in the game, just not playing defense.

marvin Sat Mar 20, 2010 10:05pm

From a coaching perspective think of the player who goes to the bench when the DP plays defense for them as having the defensive position of bench. As in:

Player, "Where am I playing this inning coach? "
Coach, "The bench."

This player has not left the game because she is still batting.

The exception to this is the Flex - who is out of the game if the DP replaces her on defense because she is neither hitting or playing defense.

The spot in the lineup where the DP starts the game is always the DP's spot. It doesn't follow anyone anywhere.

CecilOne Sun Mar 21, 2010 11:25am

Posted a couple of weeks ago, but worth repeating and expanding, at least I think so.

Not just for this topic, but many people get confused because of ambiguous terminology in conversation, cases, even clinics.
A frequent example is the difference between player, lineup and batting order.

A player is a person (Erin, Cassidy, Elayna) with a uniform number (#18, #14, #7).

A position or designation is a function or sequence for game management, defined on a lineup, with last names of course.

All players participating are shown on the lineup. All players playing offense, i.e. batting, are shown in the batting order portion of the lineup.

A player (Erin #18) is only allowed one re-entry,
But multiple players (Cassidy #14, Elayna #7) can hold a position/designation (defense or offense) during a game.

For most rules:
the lineup includes the Flex but the batting order is only the players currently on offense.

For DH, EP, AP rules:
where EP, AP are used, those positions are also in the batting order. Where DH/DP is used, the DH position is also in the batting order, and the DP is there as a note and defensive position.


Oh, and courtesy runners are just that, a courtesy, not a substitution, not counted as in the game and can not be replaced by another CR. If the CR is replaced on the bases by a substitute, that substitute also replaces the pitcher or catcher the CR was running for. This comment ignores injury/shorthanded situations.

NPRIVITOR Sun Mar 21, 2010 05:24pm

Flex/DP final Question
 
Thank you all that answered my previous post regarding the Flex/DP. I've looked through all the previous posts and still have one additional question. My brother was certainly correct that you guys have the info and I certainly appreciate you taking the time to respond. I plan on using this scenario in the State Playoffs this year and need some input as to its validity.

Line Up Card
Num Name Pos
1 Angie 1
2 Barbie 2
3 Casey 8
4 Darla DP
5..9 ...
10 Julie (Flex) 3

At the start of the first inning, Darla (DP) goes in on defense and plays for Casey. Throughout the entire game, Casey actually stays on the bench for Defense but bats on Offense. I do this so that I have a fast running Flex tied to my DP. Had Darla not been a DP since she's not a pitcher or catcher, the only way I can put a fast runner in the game for her when she gets on base is to substitute. I don't have any other speed other than my Flex who I need on Defense only.

So when we come up on offense, Angie hits a single and gets on base. I immediately bring my Flex in to run for her. Julie is still my Flex and has not left game. I do this throughout the game with Angie and Julie. Angie hits 3 times and gets on base, Julie runs 3 times for her.

Do you guys see anything wrong with playing in this manner? On a previous post someone made a great example of considering the "bench" as a defensive position when playing with a Flex.

Thanks again!

JEL Sun Mar 21, 2010 05:43pm

Quote:

Originally Posted by NPRIVITOR (Post 669650)
Thank you all that answered my previous post regarding the Flex/DP. I've looked through all the previous posts and still have one additional question. My brother was certainly correct that you guys have the info and I certainly appreciate you taking the time to respond. I plan on using this scenario in the State Playoffs this year and need some input as to its validity.

Line Up Card
Num Name Pos
1 Angie 1
2 Barbie 2
3 Casey 8
4 Darla DP
5..9 ...
10 Julie (Flex) 3

At the start of the first inning, Darla (DP) goes in on defense and plays for Casey. Throughout the entire game, Casey actually stays on the bench for Defense but bats on Offense. I do this so that I have a fast running Flex tied to my DP. Had Darla not been a DP since she's not a pitcher or catcher, the only way I can put a fast runner in the game for her when she gets on base is to substitute. I don't have any other speed other than my Flex who I need on Defense only.

So when we come up on offense, Angie hits a single and gets on base. I immediately bring my Flex in to run for her. Julie is still my Flex and has not left game. I do this throughout the game with Angie and Julie. Angie hits 3 times and gets on base, Julie runs 3 times for her.

Do you guys see anything wrong with playing in this manner? On a previous post someone made a great example of considering the "bench" as a defensive position when playing with a Flex.

Thanks again!

Also in addition to the answer on the other thread, if you pull angie out of the game twice, she has no more re-entry.

Dakota Sun Mar 21, 2010 08:20pm

Quote:

Originally Posted by NPRIVITOR (Post 669650)
...Do you guys see anything wrong with playing in this manner? ...

Yes. The FLEX used in this manner is an illegal player. FLEX cannot play offense for anyone except the DP. Rule 2-57-3.

ronald Mon Mar 22, 2010 10:05am

Sometimes people use terms back and forth and think it is perfectly clear to everyone what is happening or what the correct interpretaton is. I wonder if this is not the case with the DP and the Flex and the term out of the game (line up management tutorial or left the game). This deals with one going in for the other.

Regardless of the term, one means that the DP or the flex is not leaving the game under the substitution rubrics. It is a whole different rubric.

My understanding is the starting DP and Flex can swap back and forth all game long and it has no bearing on re-entry.
:confused:

CecilOne Mon Mar 22, 2010 10:26am

Quote:

Originally Posted by ronald (Post 669797)
Sometimes people use terms back and forth and think it is perfectly clear to everyone what is happening or what the correct interpretaton is. I wonder if this is not the case with the DP and the Flex and the term out of the game (line up management tutorial or left the game). This deals with one going in for the other.

Regardless of the term, one means that the DP or the flex is not leaving the game under the substitution rubrics. It is a whole different rubric.

My understanding is the starting DP and Flex can swap back and forth all game long and it has no bearing on re-entry.
:confused:

Yes, as long as there have been other players subbed in for the DP and FLEX before the second return.

NO, any individual player can only re-enter once. Even though it is not a substitution when first swapped, the FLEX playing offense for the DP means that DP player has left and can only re-enter once. Not the position, the player. See my ambiguous terminilogy post yesterday, this topic.

Dakota Mon Mar 22, 2010 11:05am

Quote:

Originally Posted by ronald (Post 669797)
...Regardless of the term, one means that the DP or the flex is not leaving the game under the substitution rubrics. It is a whole different rubric. ...

You have a red-letter edition of the rule book? Cool! Can I get one? :D


All times are GMT -5. The time now is 07:35am.



Search Engine Friendly URLs by vBSEO 3.3.0 RC1