The Official Forum

The Official Forum (https://forum.officiating.com/)
-   Softball (https://forum.officiating.com/softball/)
-   -   Measuring Bases (https://forum.officiating.com/softball/102584-measuring-bases.html)

MT 73 Fri Apr 21, 2017 09:22am

Measuring Bases
 
When setting up a field do we measure home to first/third to the front or the back of the bag?
While we are at it is 2nd base measured by the front, back or center from the plate?

CecilOne Fri Apr 21, 2017 09:35am

Quote:

Originally Posted by MT 73 (Post 1004930)
When setting up a field do we measure home to first/third to the front or the back of the bag?
While we are at it is 2nd base measured by the front, back or center from the plate?

All measures from the plate us the back tip. Bases and pitching plate are to the nearest edge.

umpjim Fri Apr 21, 2017 09:47am

Quote:

Originally Posted by MT 73 (Post 1004930)
When setting up a field do we measure home to first/third to the front or the back of the bag?
While we are at it is 2nd base measured by the front, back or center from the plate?

On 60 and 90 ft baseball fields 2B is centered on its base point. 1B and 3B outside outfield side corner is on base point. If softball is different we are going to have to go back and revisit all those calls at 1B on multi use 60 ft. fields:)

Tru_in_Blu Fri Apr 21, 2017 10:39am

Quote:

Originally Posted by CecilOne (Post 1004931)
All measures from the plate us the back tip. Bases and pitching plate are to the nearest edge.

Disagree on the bases measurement. First and third are measured from back tip of plate to the outfield side of the base. Bases (with a portion of second base excepted) are totally inside the diamond.

Don't have reference handy, books in the car.

IRISHMAFIA Fri Apr 21, 2017 10:47am

Quote:

Originally Posted by Tru_in_Blu (Post 1004934)
Disagree on the bases measurement. First and third are measured from back tip of plate to the outfield side of the base. Bases (with a portion of second base excepted) are totally inside the diamond.

Don't have reference handy, books in the car.

This is true, home, first and third are completely inside the diamond. Second base is centered on the intersection of the 1-2 and the 2-3 base lines so that only the inside quarter of the base is inside the diamond.

CecilOne Fri Apr 21, 2017 11:27am

Quote:

Originally Posted by CecilOne (Post 1004931)
All measures from the plate use the back tip. Bases and pitching plate are to the nearest edge.

At least I was right about the tip of the plate. :rolleyes:

Bases ....snip .... are NOT to the nearest edge.
. :o

MT 73 Fri Apr 21, 2017 11:46am

Quote:

Originally Posted by CecilOne (Post 1004939)
At least I was right about the tip of the plate. :rolleyes:

Bases and pitching plate are NOT to the nearest edge.
. :o

Actually I think we do measure the pitching plate from it's inside edge.
But am not 100% sure.
Help...

Tru_in_Blu Fri Apr 21, 2017 02:08pm

Quote:

Originally Posted by CecilOne (Post 1004939)
At least I was right about the tip of the plate. :rolleyes:

Bases and pitching plate are NOT to the nearest edge.
. :o

Oh, Ceese!

Pitcher's plate measurement is tip of the plate to the front edge of the pitcher's plate.

You shoulda stood in bed today. ;)

CecilOne Fri Apr 21, 2017 04:33pm

Quote:

Originally Posted by Tru_in_Blu (Post 1004949)
Oh, Ceese!

Pitcher's plate measurement is tip of the plate to the front edge of the pitcher's plate.

You shoulda stood in bed today. ;)

OK I fixed it, should type instead of copy and paste.


All times are GMT -5. The time now is 07:43pm.



Search Engine Friendly URLs by vBSEO 3.3.0 RC1