Quote:
Originally posted by Mark Dexter
Quote:
Originally posted by Ref in PA
Quote:
Originally posted by Mark Dexter
A2 taps the ball - considered the same as a try, this does not end A1's try, unless the first shot was determined to be "certain(ly) unsuccessful."
|
Whoa there partner. Once A2 touches the ball, A1's try has ended. You can't have two active shots going on at the same time. Does that mean you can't have two airborn shooters at the same time? no. The tap by A2 could be a violation, a new try, a bat of a loose ball, etc.
|
I agree, in theory, but where's the rule support for this?
[/B]
|
The rule support you find is in 4-40-4 "The try ends when the throw is successful, when it is certain the throw is unsuccessful, when the ball touches the floor or when the ball becomes dead."
The only legal touch of a try I can think of is when the try by A1 is on its upward arc (not sure why A2 would block a try by A1). This type of a touch I would consider a pass from A1 to A2, with A2 receiving credit should the ball go in the basket.
All other types of touches by A2 are after the try by A1 has ended or they end the try of A1.
A tap of a try by A1 on its downward arc by A2 that was going into the basket would be GT (9-12). If the ball was not going to go in, A1's try has ended and the touch by A2 is legal.
If the try by A1 did not go in immediately but is on the rim or any part of the ball is within the cylinder above the rim and A2 taps the ball, that is BI (9-11). So for A2 to legally touch the ball, it must be outside the cylinder after the missed shot by A1 - in other words the try by A1 has ended.
Either way the try by A1 ends with the touch of A2. If it was a legal touch by A2, then A2 gets credited with the made basket, not A1, as his try ended.