The Official Forum

The Official Forum (https://forum.officiating.com/)
-   Softball (https://forum.officiating.com/softball/)
-   -   Cracked softball bats (https://forum.officiating.com/softball/9164-cracked-softball-bats.html)

kssa Sun Jun 29, 2003 08:53pm

Mens slow pitch Asa league. Is their any rule about cracked bats ??? I had found that one team had the Miken ultra II bat that was cracked, so I took it out of the game....Thanks G

oppool Sun Jun 29, 2003 09:09pm

Rule 3 section 1 E
 
SHAPE. The official bat shall be round and shall be smooth. It shall be free of burrs and CRACKS.....etc



Don

scottk_61 Sun Jun 29, 2003 09:26pm

Quote:

Originally posted by kssa
Mens slow pitch Asa league. Is their any rule about cracked bats ??? I had found that one team had the Miken ultra II bat that was cracked, so I took it out of the game....Thanks G
I regularly take bats out of games due to cracks and flat spots or being out of round.
With the composite bats like the Ultra II, you often see the layers coming apart and it will leave a rough edge, so out it goes.
The Easton Synergy is really common to have a "crack" like appearance on the surface. I am told that it is structurally sound but if it is rough enough to feel with my fingers, then it isn't smooth.
Needless to say I get a lot of grief from certain players, ie MOOSE, when his favorite stick is taken away.


CecilOne Mon Jun 30, 2003 01:06pm

Can I assume you only eliminate bats for flat spots or dents that prevent them from passing through a bat ring.

Dakota Mon Jun 30, 2003 01:33pm

Quote:

Originally posted by CecilOne
Can I assume you only eliminate bats for flat spots or dents that prevent them from passing through a bat ring.

According to POE3, that is how ASA wants it called. Through the ring - legal. Can't go through the ring - illegal.

scottk_61 Mon Jun 30, 2003 01:41pm

Quote:

Originally posted by CecilOne
Can I assume you only eliminate bats for flat spots or dents that prevent them from passing through a bat ring.

Right you are, I have rarely seen a flat spot that doesn't "swell" the bat somewhat.

IRISHMAFIA Mon Jun 30, 2003 02:22pm

Quote:

Originally posted by Dakota
Quote:

Originally posted by CecilOne
Can I assume you only eliminate bats for flat spots or dents that prevent them from passing through a bat ring.

According to POE3, that is how ASA wants it called. Through the ring - legal. Can't go through the ring - illegal.

True, but don't be so quick to make the ring the ultimate test. This POE is basically referring to dinged bats.

I've seen creased bats pass through the ring. That doesn't mean I allow the bat to be used though.

It is also permissible to give the ring a little help, but should not be forced over the bat. Make sure the barrel is cleared of dirt.



All times are GMT -5. The time now is 01:26am.



Search Engine Friendly URLs by vBSEO 3.3.0 RC1