The Official Forum  

Go Back   The Official Forum > Baseball
Register FAQ Community Calendar Today's Posts Search

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old Sun Nov 04, 2001, 03:24pm
Official Forum Member
 
Join Date: Jun 2001
Posts: 15
Lightbulb

What are the keys for a balk? What do you think I should watch for in oreder to call a balk?
Reply With Quote
  #2 (permalink)  
Old Sun Nov 04, 2001, 05:07pm
Official Forum Member
 
Join Date: Aug 2000
Posts: 29
Balk = Deception or Mechanics

There are two primary types of balk:
1) Mechanical Flaws
2) Deceptions

The principal concept of the balk is that the pitcher may not deceive the base runner. Read the rules and read this board and others for the major things to watch for.

Remember this.... a pitcher cannot feint to first (in contact with the rubber). He can, however feint to second or to third. It is virtually impossible to balk to second. A leftie has a great advantage in holding the runner at first and can make a move that might look more like a balk from a rightie.

Key mechanical balks include the failure to come to a complete stop before the pitch, dropping the ball while in contact with the rubber, and throwing a pitch which does not reach the plate or the foul lines.

Finally, don't go looking for boogers --- avoid the balk call on silly little quivers and shakes. When you see one, you'll know it.
__________________
Rich Coyle
Reply With Quote
  #3 (permalink)  
Old Sun Nov 04, 2001, 09:06pm
Official Forum Member
 
Join Date: Aug 2000
Location: Spokane, WA
Posts: 4,222
I will differ slightly with Rich. As Jim Evans teaches it, there are three types of balks.

First a little history:

The balk rule has been with us since 1876, and its intent both then and now is to help assure good gamesmanship.

The Original Major League Code of 1876 stated, in part:

Rule IV. Pitching Section 5.

Should the pitcher make any motion to deliver the ball to the bat and fail so to deliver it - except the ball be accidentally dropped. The umpire shall call a “balk,” and players occupying the bases shall take one base each.


While on the surface it might appear that the rule pertained to the batter/pitcher relationship, it was actually an early effort to prevent the defense from taking an undue advantage of the baserunners. Baseball has always been tilted to the offense, and if there were no rule regarding pitchers’ mechanics and practices, the baserunners would be severely hampered in their ability and opportunity to lead off, steal bases and, ultimately, score runs.

By 1898, the balk rule looked much like today’s, with one major exception. In 1898 a pitcher could be in contact with the rubber, staring at third base or second base, then fire a ”snap throw” to first base. That lasted one year: Too many guys were getting picked off.

That’s when a rule we still have today entered the book: The pitcher must step towards the base to which he was throwing (or legally feinting). Did that rule affect baserunning? Is Seattle in Washington state?

After the 1899 rule change, teams stole 600 more bases than in the previous year, and the Baltimore Orioles set a modern season record with 364 stolen bases.

But back to the types of balks.

There are three distinct types of balks: the deceptive balk, the mechanical (technical) balk, and the penal (punitive) balk.

1. Deceptive: The pitcher is attempting, by design and action, to “illegally” deceive or “fool” the baserunner. The defense is attempting to gain an unfair advantage over the offense.

2. Mechanical: The pitcher isn’t really trying to deceive anyone. He simply isn’t proceeding in his mechanics as section 8.01 would have him.

3. Penal: Certain actions by a pitcher, so says the rules committee, are illegal and the appropriate penalty, therefore, is a balk.

Most beginning umpires concentrate on the deceptive balks. Even some veterans are heard to say, "if it ain't deceptive it ain't a balk."

On contrary side of that issue, many veterans and umpires with experience at higher levels insist the Mechanical balks are the ones the need to be called the most consistently.

Deceptive Balks:

Of the 13 balks listed in OBR rule 8.05, only six of these are commonly held to be “illegally” deceptive balks:
8.05(a) 8.05(g) 8.05(i) 8.05(j) 8.05(k) 8.05(m)

Mechanic Balks:

If we accept the premise found in Jim Evans Baseball Rules Annotated that mechanic balks are those that occur when the pitcher doesn’t behave as directed in OBR 8.01, then the following qualify as mechanic balks.
8.05(c) 8.05(e) 8.05(f)

Penal Balks:

Certain actions, again, according to the rulesmakers, should be illegal, and the appropriate penalty should be a balk. Why? Primarily because these actions tend to stifle the offense, and as stated previously, baseball rules do, indeed, favor the offense. Stealing and scoring is encouraged. The Penal balks then are:

8.05(b) 8.05(d) 8.05(h) 8.05 (l)

Advice for calling balks will range from "don't" to "get'em all" and everything in between. Your best allies in this area are the practice of the umpires in your local association, time and experience. (Time does not equal experience, by the way.)

Most trainers will advice rookies to call everybalk you see. This helps the learning process and the discrimination process, after all, you can't discriminate that of which you are unaware.

Later, as you move up. You will define for yourself and your games the "tolerance" you will use in calling balks.

Of course, there are still those "black and white" rules guys who insist that everything in the rule book is sacred and most be enforced as written. You will not find those umpires working the top levels of our advocation.

Good luck.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 09:05pm.



Search Engine Friendly URLs by vBSEO 3.3.0 RC1