Baseball measurements

[Rich Ives]

Plate to Rubber: Back ppoint to front of rubber.

Bases:

Measure out the square. Consider the points at the corners as A, B, C, and D.

Home plate goes with the point (of the white part) at point A and the two 12" edges aligned with the two adjacent sides (foul lines).

First and Third base bags go at points B and D, with the bag entirely within the square. (The measurement is from the point of the plate to the outfield side of the bases.)

The second base bag is centered on point C with the flat edges "aimed" at first and third bases. (The measurement is fron the point of the plate to the center of the bag.)